Advertise Here
Make you own Quick Match
Quick Match is a slightly modified piece of Black Match that has been enclosed by a 1/4" paper tube. This helps force the smoke andfire forward when the Black Match is lit inside. This is great for setting off Multiple fireworks within a short amount of time. This is what professional Pyrotechnicians use, for their finales.
| Items you need: Ingredients: -Black Match from previous -Kraft Paper |
|
| Tools Need: Cool Glue gun Glue Sticks |
Hobby Knife or Scissors 5/16 wooden dowel at least 24" |
Before you begin this project you should all ready of made some Black Match.
Procedure:
This you can work on inside.
Making the pipes:
You want to create enough pipes to cover all of your string. Cut the
Kraft paper into 1 1/2" strips going from one side of the roll to the
other. After you get a couple of strips cut, you want to take the wooden
dowel and bend all of the strips around the dowel this will help make the
paper easier to hold and glue. Now only take one of the strips and
completely bend it around the dowel. Take the cool glue gun and put a
small stream of glue along where the end will overlap the Kraft paper.
You want to do this the entire length of the pipe to make sure that no
gases can escape from it. After you make of few of these move on to the
next step.
Connecting the Pipes:
You are going to take the Black Match that you created and use it to
thread the Kraft tubes that you created onto the fuse. To connect the
pipes you are going to put a 1" slit in the end of one of the pipes that
you want to connect. Put a bead of glue around that end an push it into
the other tube. Use the glue gun to smear glue around where the tubes are
connected. You are now done with that section of fuse.